Super Cracker with Puller
It is a patented product designed by Master Technic Ltd. It combines of two apparatus, barrel cracker and tube extraction in a single body. Thus, you will not have to take separate apparatus for the lockpicking process wherever you go. You will save time and do several jobs with a single apparatus.
INSTRUCTIONS FOR USE:
Step 1: Make a hole to the keyway by mounting the thin size screw (No-1, Blue colour) by help of the hexagonal screw holder tool in the set to the cylinder core.
Step 2: Then, widen the first hole bed again by using the middle size screw. (No-2, Gold colour).
Step 3: Screw the No-3 (Titan colour) thick screw into the cylinder core where the sufficient width is opened.
Step 4: Place the outer part of the screw no.3 (Titan colour) mounted on the lock core into the screw slot in the movable inner mechanism of the KIR-35X product and turn the hole at the rear of the KIR-35X product and remove the space and remove the triple lock core -screw-tube pulling tool. confine each other.
Step 5: Insert the screw number 3 (Titan color) into the lock core so that 2/3 part is in the center of the cylinder. Place the Steel Disc on the outside of the cylinder. Place the remaining part of the screw into the screw socket located inside the KIR-35X tool and reset the gap by turning the rotary knob on the back.
Step 6: Pull the inner mechanism of the KIR-35X product by turning it with the allen in the set and pull the lock core. You will see that the lock core easily comes out by breaking the pins.
Step 7: You can open the door with a screwdriver or similar tool that you will use inside the empty lock core.
CRACKER PROCESS OF CYLINDER WITH ZERO POINT ON THE DOOR SURFACE
Follow the procedures described above until Step 6.
Step 7: Turn the inner mechanism of the KIR-35X product with the allen in the set and pull out the lock core in such a way that it will catch the mouth part of the KIR-35X tool.
Step 8: When you are sure that the KIR-35X product has been pulled out of the lock core in sufficient amount, catch the cylinder tightly by tightening the side screw with the allen key in the set.
Step 9: By screwing the product handle in the set to the back of the KIR-35X product, you can break the cylinder by stretching it up and down, right and left with short stretches.
With the help of the BAB-17 plastic cylinder turning device in the set, you can open the locked door by intervening from inside the empty cylinder slot.
Products included in the set:
1 Pcs KIR-35X tool
1 Pcs Aluminum handle
1 Pcs Screw holder
10 ea. Remover screw
1 Pcs Steel disc
1 Pcs Screwdriver bit
1 Pcs No.6 Allen Key
2 Pcs Cylinder Opening Apparatus
4 Pcs Screws with nuts