It is a patented product designed by MASTER. It combines the functions of two apparatus performing barrel cracker and tube extraction in a single body. Thus, you will not have to take separate apparatus for the lockpicking process wherever you go. You will save time and do several jobs with a single apparatus.
INSTRUCTIONS FOR USE
Step 1: Enlarge the keyway by mounting the thin size screw number 1 (Blue colour) to the hexagonal screw holder apparatus in the set to the lock cylinder.
Step 2: Then, widen the first hole bed again by attaching the middle size screw numbered 2 (Gold colour).
Step 3: Screw the # 3 (Titan colour) thick screw into the keyway where the sufficient width is opened.
Step 4: If there is no rosette or similar protector on the front face of the lock core, attach the round DISC apparatus in the set to the front face of the lock core. (When you do not use this disc, the lock core will come forward and prevent you from working)
Step 5: Place the outer part of the screw no.3 (Titan colour) mounted on the lock core into the screw slot in the movable inner mechanism of the KIR-35X product and turn the hole at the rear of the KIR-35X product and remove the space and remove the triple lock core-screw-tube pulling tool. confine each other.
Step 6: Pull the lock core by turning the inner mechanism of the KIR-35X product, which extends to the back, with the allen in the set.
Step 7: You can open the door with a screwdriver or similar tool that you will use inside the empty lock core.
CRACKER PROCESS OF CYLINDER WITH ZERO POINT ON THE DOOR SURFACE
Follow the procedures described above until Step 6.
Step 7: Turn the inner mechanism of the KIR-35X product with the allen in the set and pull out the lock core in such a way that it will catch the mouth part of the KIR-35X product.
Step 8: When you are sure that the KIR-35X product has been pulled out of the lock core in sufficient amount, catch the cylinder tightly by tightening the side screw with the allen key in the set.
Step 9: By screwing the product handle in the set to the back of the KIR-35X product, you can break the cylinder by stretching it up and down, right and left with short stretches.
With the help of the BAB-17 plastic barrel turning device in the set, you can open the locked door by intervening from inside the empty cylinder slot.
Products included in the set:
|1 Pcs||KIR-35X Tool|
|1 Pcs||Aluminum handle|
|1 Pcs||Screw holder|
|10 ad||Remover screw|
|1 Pcs||steel disc|
|1 Pcs||Screwdriver bit|
|1 Pcs||6 Allen Key|
|2 Pcs||cylinder Opening Apparatus|
Screws with nuts